Concrete Work in Vancouver

The City of Vancouver requires building permits for retaining walls over 1.2 metres. The Protection of Trees Bylaw covers any tree with a DBH over 20 cm, and removal or significant root disturbance requires a permit. Heritage overlays apply in Shaughnessy, parts of Kitsilano, and Mount Pleasant. Permit timelines are longer and more variable than in other municipalities; we recommend submitting well before your target start date.

Most of Vancouver sits on glacial till with clay pockets and, in some neighborhoods, fill from historic grading. West side soils (Kitsilano, Point Grey, Dunbar) tend to be better structured. East side soils vary more and often include fill. Downtown and the waterfront have completely engineered substrates over deep fills. Every project starts with an on site soil assessment. This is why every Trueform concrete Work project in Vancouver starts with an onsite soil assessment before we finalize base depth, drainage, and reinforcement.

Vancouver receives 1,150 to 1,400 mm of annual rainfall depending on neighborhood. The west side is slightly wetter than the east side. Winter freeze thaw is mild. Summers are drier than the Fraser Valley but less dry than Tsawwassen. Coastal fog is common along the water. Our concrete Work installations are designed for these specific conditions. Drainage capacity, freeze thaw movement, and seasonal load are all factored into the spec for every Vancouver project.

We complete concrete Work projects across all of Vancouver, including Kitsilano, Point Grey, Dunbar, Kerrisdale, Shaughnessy, Arbutus Ridge, and also Mount Pleasant, Riley Park, Hastings-Sunrise, Kensington-Cedar Cottage, West End, Mackenzie Heights, South Cambie, Oakridge. If your Vancouver address isn't on this list, we still serve it. Call (604) 217-8966 to confirm.

Assume tree protection is part of every Vancouver project. Submit permits early because Vancouver timelines are unpredictable. On laneway house lots, design the full backyard as a single project rather than piecemeal. In Shaughnessy and heritage areas, verify material approvals before ordering.

Standard concrete flatwork in the Fraser Valley costs $8 to $15 per square foot for basic broom finish slabs, $12 to $25 per square foot for stamped or decorative finishes, and $10 to $18 per square foot for exposed aggregate. Concrete driveways typically range from $6,000 to $15,000 depending on size and finish. Foundation pads and garage slabs are priced based on size and reinforcement requirements. In Vancouver specifically, the cost driver to watch is the soil and access combination. Assume tree protection is part of every Vancouver project. Submit permits early because Vancouver timelines are unpredictable. On laneway house lots, design the full backyard as a single project rather than piecemeal. In Shaughnessy and heritage areas, verify material approvals before ordering. We give you a transparent itemized estimate after the onsite visit so there are no surprises once the concrete Work build starts.